MediaVise® Rackmount HDD Destroyer

Product

MediaVise® Rackmount HDD Destroyer

Product description ▼

The MediaVise® Rackmount HDD Destroyer (MVR-HDD) is the first and only commercially available HDD destroyer that can be installed in a server rack.

The MVR-HDD was designed for data center deployments utilizing between nine and twelve standard rack units. The MVR-HDD only takes up nine rack units. All mounting and hardware installation is included.

The MediaVise® Rackmount HDD Destroyer has been successfully evaluated by the National Security Agency (NSA/CSS approved) for the secure destruction of HDDs

The rackmount destroyer never needs to replace or sharpen the blades and uses Phiston’s proprietary technology hydraulic crushing system. The destroyer doesn’t simply fold a hard drive or punch a few holes in it; the device crushes and demolishes every square inch of the HDD, rendering all data storage surfaces completely sanitized.

The MVR-HDD can also safely destroy cell phones, circuit boards, memory boards, and CD/DVD/Blue Ray.

With the convenience and peace of mind of having full chain of custody, the MVR-HDD is your safe, easy-to-use, and comprehensive hard drive destruction solution!

Compliance ▼

H4 level of destruction based on DIN 66399 for HDDs
Global Safety and EMC Standards
Global Environmental Requirements
GMA, NIOSH, and OSHA workplace compliance.

Key Features & Benefits ▼

Media destruction can be performed in-house, so media never leaves your custody intact or entrusted to a contractor.
Destroyed media falls directly into a locked, secure debris collection drawer that can accommodate up to 25 destroyed HDDs and other media. The operator never has to touch the debris to remove it from the crushing chamber.
Locking Drawer for securely storing destroyed media can only be opened by a secure passcode.
Fully automated, hands-off operation for user safety.
Fully sanitizes drives in less than 30 seconds
No special adapters are needed for power or for crushing various media.
Crushing plates never need to be sharpened or replaced.
Rack-mountable in Standard Racks and safe for Data Centers. Uses nine rack units.
Adaptable to mobile racks (typically 9-12 mobile rack units). Mobile racks are the ideal vehicle for a complete mobile erasure/overwrite and destruction platform for data centers. Phiston builds mobile racks with up to 18 units.

Technical Specs

Product Name and Model

MediaVise® Rackmount Hard Disk Drive (MVR-HDD) Destroyer

Dimensions

16” x 28” x 19” (41 cm x 72 cm x 48 cm) (H x L x W)

Occupies 9 EIA standard rack unit spaces (9RU)

Weight (excludes packing and crating)

160 lbs. (72 kg) – 110-volt model

180 lbs. (82 kg) – 220-volt model

Shipping Weight (includes packing, crating, and pallet)

200 lbs. (91 kg) – 110-volt model

220 lbs. (100 kg) – 220-volt model

Shipping Dimensions

21.25” x 23.25” x 32.5” (H x W x D) (54 cm x 60 cm x 83 cm) (H x L x W)

Power Requirements (voltage/frequency/current)

See the label on the rear of your machine for factory settings.

220 Volts A.C. ±10%, 50/60 Hz, 7.5 Amps

110 Volts A.C. ±10%, 50/60 Hz, 15 Amps

Factory configured for any international power supplies.

Power Cord Included

Length: 6 ft. (183 cm), 2 Pole-3 wire grounding: C13/C14 three-prong grounded (IEC 60320) or equivalent global-region standard per request.

Ambient Operating Temperature

40 – 100 °F (4 – 37.8°C)

Media Sanitization Modality

Hydraulic crushing platform fitted with a pair of patented corrugated interlocking crushing plates, delivering 20 tons (40,000 lbs) of destructive forces to mangle and destroy the HDD’s magnetic data storage platters, controller, and read heads.

Acceptable Media

HDD and Enterprise HDD (includes HAMR, MAMR, EAMR, and Hybrid), cell phones, circuit boards, and PDAs.

Media Sanitization Throughput

30 seconds. Debris falls into the debris bin. No need to clean the machine after each use. (120 Drives per hour)

Deployment/ Transportability

Rack mounted on retractable slide tracks in EIA standard server rack. Uses 9RU.

Commercial grade, portable SSD destroyer that is safe for deployment in offices, data centers, or on a truck.

Machine Control/ Monitoring

Fully automated, hands-on operation for user safety.

Media Feeding

Gravity-assisted, top-loaded manual feed port for inserting one device at a time. 5.75” x 1.25” x 4” (15 cm x 3 cm x 10 cm) (H x L x W)

Debris Collection

Locked, secure debris collection drawer that holds up to 25 destroyed computer HDDs and 50 laptop HDDs. Debris drawers can only be opened by an authorized operator with a key or by entering a 4-digit access code for the optional electronic lock and keypad. The window in the drawer allows inspection of debris.

Jam/Unjam

Manual unjam.

Safety

Completely automatic, hands-off operation. Won’t operate if the lock-out door is not completely closed, preventing hands or pieces of clothing from being carelessly caught in the crushing chamber.

The user never has to touch potentially dangerous debris.

Maintenance/ Longevity

Crushing plates never need replacing.

Technical support

On-call technical support service department; nationwide and international technical support teams can be deployed when required repairs or maintenance.

Compliance

OSHA workplace compliant for quiet and safe operations. CE and GMA compliant.

National Security Agency (NSA) successfully evaluated the destruction of HDDs. Included on NSA’s Evaluated Products List (EPL). Evaluated and approved by the Royal Canadian Mounted Police (RCMP) for Secure Destruction of HDDs and Miniaturized Electronic Devices, including SSDs, USBs, PDAs, and cell/smartphones. CE/EU listed.

Key Features & How They Benefit